01
Check whether the USB cable of the laser survey module is properly connected, at both the EXCON and the laser survey module.
02
Check whether the laser survey module is found by Windows when connected.
The laser survey module beeps and is visible in the left column when the Windows File Explorer is opened.
03
Check whether the number of measurements is the same as the number of radio receivers in the field + 2 calibration module
measurements (8 radio receivers + 2 calibration module measurements = 10 measuring points).
04
Check that the number of radio receivers connected is the same as the number of radio receivers enabled in the Maintenance tab.
05
Click on the EXCON on Import laser tool. The measured values are read in:
| Green check mark behind the button All measured values have been read in correctly. | The problem is solved. |
| Red cross behind the button The measured values cannot be read correctly. | Contact local supplier |