It takes longer than 1 minute to calibrate the positioning system. The calibration icon remains on loading.
Check in Location Setup that all frequency values behind the radio receivers are green.
| All frequency values are green | ➔ | Go to Step 2. |
| Not all frequency values are green | ➔ | Go to Radio receiver [number] not receiving. |
Power down the EXCON by clicking Shut down from the Windows Start menu. Wait for the computer to shut down completely.
Then press the red ON/OFF switch on the back of the EXCON to O and disconnect the EXCON power cable from the cable reel.
Reconnect the EXCON power cable to the cable reel and press the red ON/OFF switch on the back of the EXCON to I again.
Press the ON/OFF button on the front of the EXCON to restart the computer. Enter the password on the computer
and press enter to prevent the system from shutting down again.
Restart SUIT and under Site Setup, click Start Calibration again. The system is being calibrated.
| Green check mark behind the button The calibration went well. | ➔ | The problem is solved. |
| Loading icon behind the button Calibration takes a long time. The calibration icon remains on charge. | ➔ | Please contact local supplier |
| Red cross behind the button Calibration did not go well. | ➔ | Go to Calibrating the positioning system fails. |