The radio receiver still receives a signal from the calibration module, but receives little data.
01
Is the positioning system calibrated?
| Yes | ➔ | Go to Step 2 |
| No | ➔ | Go to Step 3 |
02
Turn off the calibration module by setting the red ON/OFF switch to O.
03
Make sure there are no obstacles between the calibration module and the radio receivers and try the calibration again.
On the EXCON, click Start Calibration. The system is being calibrated.
| The radio receiver works well | ➔ | The problem is solved. |
| The radio receiver is not functioning properly | ➔ | Go to Step 4 |
04
Place the radio receiver one meter away from the wall or metal structures.
| The radio receiver works well | ➔ | The problem is solved. |
| The radio receiver is not functioning properly | ➔ | Go to Step 5 |
05
Reposition the calibration module and try to calibrate the system again. On the EXCON, click Start Calibration. The system is being calibrated.
| The radio receiver works well | ➔ | The problem is solved. |
| The radio receiver is not functioning properly | ➔ | Remove the radio receiver from the system. The radio receiver must be returned to the local supplier for repair. Go to Deploy spare radio receiver. |