Deploy the SDS laptop as a replacement for the Spectator computer
Requirements
CASE 1 | EXCON
CASE 12 | SDS Laptop
– Network cable
01
Shut down the Spectator
02
Switch off the Spectator and remove the plug from the power socket.
03
Make sure the EXCON is turned on and that SUIT is running.
04
Connect the network cable to the port next to the access point ports on the EXCON and the network port on the laptop.
05
Turn on the SDS laptop and make sure the charger is connected to the charging socket.
If the EXCON SUIT has already started, the Spectator software will automatically start on the SDS laptop